10G support | Yes |
AC input frequency | 50/60 Hz |
AC input voltage | 110 - 240 V |
Basic switching RJ-45 Ethernet ports type | None |
Certification | CB, cUL, LVD |
Depth | 487.44 mm |
Electromagnetic compatibility | FCC, CE, C-Tick, IC, VCCI |
Flow control support | Y |
Form factor | 1U |
Full duplex | Y |
Heat dissipation | 1083 BTU/h |
Height | 43.5 mm |
MAC address table | 294912 entries |
Management protocols | SNMP v1/v2c/v3 |
Mean time between failures (MTBF) | 94262 h |
Networking standards | IEEE 802.1D,IEEE 802.1Q,IEEE 802.1p,IEEE 802.1s,IEEE 802.1v,IEEE 802.1w,IEEE 802.1x |
Noise level | 79.4 dB |
Operating relative humidity (H-H) | 0 - 95 % |
Operating temperature (T-T) | 0 - 45 °C |
Packet buffer memory | 32 MB |
Power consumption (typical) | 120.6 W |
Power over Ethernet (PoE) | No |
Quality of Service (QoS) support | Y |
Rack mounting | Yes |
Redundant power supply (RPS) support | Y |
Spanning tree protocol | Y |
Stackable | Yes |
Storage relative humidity (H-H) | 0 - 95 % |
Storage temperature (T-T) | -40 - 70 °C |
Switch layer | L3 |
Switch type | Managed |
Switching capacity | 2211.84 Gbit/s |
USB 2.0 ports quantity | 1 |
Web-based management | Y |
Weight | 9800 g |
Width | 441 mm |
QSFP28 ports quantity | 6 |
DXS-3610-54S - Layer 3 Stackable 10G / 100G Managed, 48-port 10G SFP+, 6-port 100G QSFP28 interfaces switch with Standard Image with 2 full load front-to-back AC PSUs and 5 front-toback fan modules
DXS-3610-54S/SI
Out of Stock