APC NetShelter Server Racks (37 products)

690 x 930 x 700 mm, 75 kg, 125 - 240 VAC, 50/60 Hz

Dedicated rear cable access pointThe cable port has a capacity of up to 400 cables and is situated perfectly for ground or under-floor cabling.Integrated heat removalHigh efficiency fan modules remove heat and eliminate the need to purchase a costly cooling unit for your IT equipment.Integrated power stripProvided with a power strip which has 3 available IEC receptacles, 3 NEMA equipment power cords.Removable lockable rear panelProvides customers with easy accessibility to equipment and allows equipment to be installed without powering... More Info

NetShelter CX Mini Enclosure White Finish

NetShelter CX Mini Enclosure White FinishNetshelter CX Mini is specifically designed to house a complete small-office IT installation comprised of one or two servers, network hardware and peripheral devices. It combines extreme noise reduction and moderate thermal capacity with exceptional reliability and an all-inclusive, plug-and-play specification. Designed to accept tower form factor servers, the CX Mini can also be converted to accept rack form factor servers using a 12U rack mount conversion kit (AR4000MV12U). The resulting EIA rack is... More Info

NetShelter SX 48U 750mm Wide x 1200mm Deep Networking Enclosure with Sides

Integrated high density cable managementDecrease installation time while supporting the cabling needs of large networking switches.Cable protection and pass-throughSmooth plastic fingers provide proper bend radius.Optimized enclosure design for side-to-side airflowAirflow management panels, left vertical mounting rail, and side airflow duct kit ensure proper side-to-side airflow to the networking switches from the cold aisle and provide isolation of hot air preventing it from re-entering the cold aisle. Additionally, the front left vertical... More Info

NetShelter SX 24U 600mm x 1070mm Deep Enclosure

Rack enclosures with advanced cooling, power distribution, and cable management for server and networking applications in IT environments. Includes: Casters, Doors, Key(s), Leveling feet, Roof, Side Panels, User Manual. More Info

NetShelter CX Mini Fixed Rail Kit

Convert Tower Servers to rack ServersUse the Fixed Rail Kit to mount tower servers horizontally in the Rack.One-size fits all for non-compatible serversResolves issues of non-conpatability between various 3rd party vendor equipment, rails and racks. More Info

NetShelter SX 48U 600mm Wide x 1200mm Deep Enclosure

-Rack enclosures with advanced cooling, power distribution, and cable management for server and networking applications in IT environments. -Includes: Baying hardware, Documentation CD, Key(s), Leveling feet, Mounting Hardware, Pre-installed casters, Side Panels, User Manual.-Adjustable mounting depth. -Cable access. -Multi-vendor equipment compatibility. -Numbered U positions. -Protective grounding provisions. -Removeable reversible fully ventilated doors. -Simple baying installation. -UBC Zone 4 stabilization provisions. More Info

NetShelter CX Mini 12U Vertical Mounting Rail Kit

Quick install vertical mounting rail kitUsing pre-existing holes and supplied hardware, these vertical mounting rails fit quickly and conveniently into place, transforming the CX Mini into a 12U Rack Enclosure. More Info

NetShelter SX 42U 750mm Wide x 1070mm Deep Networking Enclosure with Sides

NetShelter SX Networking Enclosure expands APC's superior IT enclosure line with improved support for high density networking applications. Integrated high density cable managers and improved cable access roof provide support for large cable bundles. When combined with the Side Airflow Duct Kit, the Networking Enclosure ensures complete isolation of cold intake and hot exhaust air for large switches and SAN directors.Includes: Baying hardware, Documentation CD, Key(s), Keyed-alike doors and side panels, Leveling feet, Mounting Hardware,... More Info

Dust Filter Pack NetShelter CX 18U & 24U 2 Small Filters

This Dust Filter Pack for the NetShelter CX allows the user to reduce the airborne particles entering the enclosure. The reticulated plastic filter material is washable and easily removed/replaced. Using the Dust Filter Pack on the NetShelter CX increases the Ingress Protection (IP) rating of the enclosure from IP44 to IP54 and reduces the risk of dust related equipment issues, such as overheating, system failure, and permanent data loss.Includes: Installation guide, Mounting Hardware, Qty 2 - Metal filter lower cassettes, Qty 2 - Washeable... More Info

NetShelter SX 48U 750mm Wide x 1070mm Deep Enclosure

Tall and wide enclosure with 48U spaces for additional equipment and increased cable management options for high density server and networking applications. More Info

Dust Filter Pack Netshelter CX 38U 2 Small Filters & 2 Large Filters

Easily WashedNo purchasing of additional filters required. Simply remove the existing filter material, wash it in warm running water, and replace it back in its metal cassette.Reduce dust related equipment issuesProtecting the equipment inside the CX from airborne contaminants such as dust reduces the risk of related equipment issues, such as overheating, system failure, and permanent data loss. More Info

High Security Handle Adaptor Kit

This easy to install adaptor kit facilitates the use of NetShelter SX handles (including 'Combination Lock Handles' - part number: AR8132A and NetBotz Rack Access PX-HID part number: AP9361) on the NetShelter CX. When combined with Netbotz Rack Access PX-HID, this adaptor kit enables remote and local access control of the NetShelter CX. This High Security Handle Adaptor Kit is used typically in Healthcare, Education, Finance, Retail and Hospitality to enhance the security level, access control and compliance capability of the NetShelter CX... More Info